View-Speed Inc.

Skewer Installation Instructions

1.       Remove your old skewer.

2.       Insert your new View-Speed Inc. skewer.

3.       Thread nut to skewer with Loctite 249 Quicktape in thread mating area according to directions on the website.

4.       The keyed part of the nut faces the open slot of the fork slot or dropout or track fork opening.

5.       Insure your bicycle wheel is aligned properly and tighten skewer with a 5mm hex key and  torque wrench to not exceed 6 NM.

6.       Check that at least 1 or 2 threads show on the nut.

7.       Check that your wheel is secure.

8.       If you have questions please visit our website www.view-speed.com for more information.

20120302